|
The beveling machine is adopted with the milling principle to mill the angle for the edage of the steel plate , and to get the groove for welding. The machine id accurade in size,bright and smooth in the surface, and is formed once ,There is no need to make de burning, It is convenient in operation,very high in working efficiency(3m per min) and low in energy consumption.
| type |
GD-20 |
| plate(N/mm2) |
<400 |
>400-500 |
>500-600 |
| plate |
A3 |
16Mn |
1Cr18Ni9ri |
| max width (mm) |
20 |
16 |
12 |
| feed speed v(m/min) |
2.9 |
2.9 |
2.9 |
| beveling angle |
25-55 |
| min straight edge e(mm) |
2 |
| max thicknessh(mm) |
25 |
| facer(mm) |
200 |
| motor |
Y112M-4 4KM/1440r/min |
| overall dimension(L*W*H) |
1240*940*1500 |
|
Current position: 
Issues the good friend this information
Prints this page